2015-2017 Ford 5.0L Mustang GT Supercharger Systems

15-17 mustang gt.jpeg
15-17 mustang gt2.png
15-17 mustang gt3.jpg
15-17 mustang gt4.jpeg
15-17 mustang gt.jpeg
15-17 mustang gt2.png
15-17 mustang gt3.jpg
15-17 mustang gt4.jpeg

2015-2017 Ford 5.0L Mustang GT Supercharger Systems

from 6,654.99
Head Unit:
Charge Cooler:
Add To Cart

Complete System

  • 2015-2017 - Complete systems are available for manual and automatic transmission vehicles.

  • 630HP Complete Systems, 50-State Smog Legal under CARB E.O. # D-213-36

  • Complete, fully calibrated supercharging systems are available for the 2015-2017 5.0L Mustang GT, featuring the V-3 Si centrifugal supercharger with air-to-air charge cooler.

  • The complete system will boost your stock 2015-2017 GT to 630 HP and 483 lb/ft torque with 7.5-8.5 PSI from the V-3 supercharger at the factory redline.

  • The S550 Mustang system uses Vortech's V-3 Si supercharger. Continued development in Vortech's Lab resulted in the V-3 Si. The "i" stands for improved and with its new patented oil control system and state of the art centrifugal compressor stage this V-3 literally blows away the competition. Industry leading 78% adiabatic efficiency [SAE J1723 standard] means less heat is being generated, drive power is reduced and more net power is produced. Less heat also means better durability. Also, Vortech's supercharger systems weigh less than half of the low-tech competing brands.

  • Superior Technology
    • Centrifugal superchargers easily make more pressure and flow than a roots type blower and are much more efficient. Read our Roots vs Centrifugal comparison to see the numbers.

    • Vortech supercharger systems are a great value. Dollar for dollar, Vortech systems deliver more horsepower than virtually any other method of upgrade. Also, driven normally, gas mileage often increases rather than decreases.

    • Additional Kit Options
      • For higher-horsepower, custom-tuned installations we recommend a tuner kit, which does not include a fuel pump, fuel injectors or ECU programmer. This requires you or your installer to provide custom calibration and the required fuel components. The V-3 Si supercharger included with the tuner kit is capable of up to 775HP on modified vehicles. Tuner kits are also available with the 1,000HP V-7 JT supercharger for high-performance racing vehicles. Call Vortech or your dealer for more information.

      • Available Supercharger Finishes
        • Multiple kit finishes available. For that fully integrated look, 5.0 Mustang systems are available in factory matching black finish. Satin and Polished units are also available.

        • Complete System Included Components and Features
          • - V-3 Si compressor with 3.60" drive pulley
          • - Manifold boost pressure: 7.5-8.5 psig @ redline on stock engine
          • - Supplied SCT programmer re-flashes the ECM with a safe, custom Vortech calibration for 91-octane fuel.
          • - Fuel system upgrade includes fuel rail spacers and high flow replacement fuel injectors
          • Air inlet assembly includes:
          • - High-flow roto-molded ducting. Mates to OEM airbox and some aftermarket "CAI" MAF/inlet assemblies
          • - OEM replacement K&N panel filter
          • - Silicone sleeves and reducers
          • - Stainless steel clamps
          • - PCV and breather hose provisions
          • - Replacement engine coolant pipe and hose assemblies
          • - Engine coolant reservoir replacement assembly
          • - Dual plate supercharger mounting system includes idlers, drive belt and all hardware. Mount features multiple position idler location for a wide range of belt and pulley fits.
          • Discharge components include:
          • - High flow air/air charge cooler. 24" x 13" x 3.5" cooler core.
          • - Mandrel bent 3" and 3.5" aluminum charge tubes for high flow and minimal weight
          • - Stainless steel clamps
          • - Silicone sleeves
          • - 98mm MAF housing configured for "blow-through" use. Integrated air-straightener upstream of the MAF housing.
          • - Vortech Maxflow Race Bypass Valve with filter

          • Installation
            • Installation time is rated at 6-9 hours.


            • CARB Compliance
              • Complete systems are smog legal per California Air Resources Board (CARB). CARB Executive Order # D-213-36

              • Optional Parts/Accessories
                8-Rib Drive Upgrade
                • 4FQ116-003 - The 8-Rib pulley upgrade is a must for any high-output tuner kit. The extra two ribs allow 33% more drive power to be transmitted to the supercharger and also reduce slip that reduces power and shortens belt life.

                • Supercharger Pulleys
                  • 6-Rib pulleys: 2A036-348, 2A036-333, 2A036-312, 2A036-287
                  • 8-Rib pulleys: 2A038-348, 2A038-333, 2A038-312, 2A038-295

                  • Fuel Pump Booster
                    • 5A102-029 - The Maxflow® fuel pump booster increases voltage to the fuel pump for increased flow to the injectors. FPB2 is microprocessor controlled and is pre-programmed for the new 5.0.
                    • 5A102-036 - The FPB1 Maxflow® fuel pump booster is like the 2 version but has a fixed voltage increase without programmability. Can be operated with a pressure switch. Features convenient plug-and-play harness for simple installation.

Product Details

The ONLY 50-State Smog Legal Centrifugal Supercharger System on the market! CARB EO # D-213-36


630HP - The complete system will boost your stock 5.0 GT to 630HP and 483 LB/FT Torque with 7.5 to 8.5 PSI from the V-3 Si Supercharger at factory redline using CA 91 Octane fuel.



775HP - The same V-3 Si Supercharger included with the complete system is capable of supporting additional HP on lightly modified vehicles.

1,000HP - Tuner kits are also available with the powerful V-7 JT compressor stage that support four digit horsepower numbers with additional engine mods. See 2015-2016 Mustang Tuner Kits page for additional information.